| Bullivants provides its customers with non - accredited and accredited training courses. |
| Non - accredited training includes: |
- Slinging awareness
- Safe use of height safety systems
- Working at heights
- Wire rope care & use
- Lashing systems - application, care & use
- Recovery of mobile equipment
|
Accredited training is also available through our network of
Registered Training Agents: |
- Dogman basics - slinging awareness
- Rigging and dogman
- Safe use of lifting equipment
|
| WORK SAFELY AT HEIGHTS COURSE |
| The Aim |
| This course is most suitable for persons who are required to undertake straight forward height related tasks. It aims to teach basic techniques in assessing real situations, equipment selection, fitting and using height safety equipment and to help to provide a safe and secure working environment for all employees. |
| Content |
| Introduction and enrolment |
- Duty of Care
- WAH Application DVD
- OHS Legislation and Standards
- Basic Risk Assessment associated with work at heights,
the "Hierarchy of Control" explained.
- What do I need to do my job? Is it restraint or fall arrest?
- Equipment Selection, Fitting and Inspection criteria
- Anchor points - what do I hook on to?
- Examination and close out
- Practical onsite (discuss, select and hook up)
|
| Learning Outcomes |
| All participants will be able to asses real height related situations, select appropriate equipment, fit/use equipment correctly and be able to conduct inspection before use. |
| Target Participants |
For employees who are working at height. Supervisors and OHS persons.
This is an awareness course and certificate of competency will not be awarded. |
| To register your interest for this course please contact us via email: |
Email: andrew.taylor@bullivants.com
Phone: 1300 722 999
Mobile: 0401 106 758 |
| BULLIVANTS SLINGING AWARENESS COURSE |
| The Aim |
| This course is primarily designed to reach our customers in the workshop or wherever lives and capital equipment are dependent on safe lifting practices. It aims to teach basic safe lifting techniques and to assist employers to provide a safe and secure working environment for their employees. |
| The objectives |
- To gain basic knowledge and understanding of product characteristics, including their capabilities and limitations.
- To understand the importance of knowing the weight of the load.
- To have sufficient knowledge of slinging practice to select the
correct equipment and methods to lift a load.
- To understand the significance of terms and abbreviations such
as SWL, WLL, MBF etc.
|
| The Benefits |
- Higher Levels of safety, resulting in lower costs in the area of compensation, insurance etc.
- A reduction in down time through fewer accidents resulting in injury
to personnel and equipment damage.
- A thinking approach to the selection and use of lifting & height safety gear in the workplace, leading to a healthy interest in the job.
|
| Target Participants |
For employees who need basic instruction for those situations where a
rigger or dogmen is not required, as a refresher course or for supervisors to recognise potentially dangerous lifting situations. This is an awareness course and certificate of competency will not be awarded. |
| The Format |
The course contains segments on the safe use of wire rope, chain,
slings, hardware, slinging etc. and can be tailored to your needs. All Course
material and take away notes are provided and wherever possible practical demonstrations on the inspection of your or our lifting equipment is used. |
| To register your interest in this course please contact us via email: |
Email: andrew.taylor@bullivants.com
Phone: 1300 722 999
Mobile: 0401 106 758 |
| |
Products & Services |
Products |
New Products |
Inspections - BEAM
Bullivants Online |
Fabricated Lifting Product |
Height Safety Installed Systems
Hire |
Testing |
Splicing & Onsite Services |
Technical Support |
